ASTM Sb167 Nickel Based 2.4816 Inconel Alloy

• Product Type: Stainless Steel Pipe
• Material: Feni
• Carbon Content: Low Carbon
• PCD: as Request
• ET: as Request
• Hole: as Request
• Model NO.: Inconel 600
• Transport Package: Standard Packing with Plastic Bags and Strapped Bu
• Specification: Thickness: 0.4-30mm as request
• Trademark: ABOOM
• Origin: China
• HS Code: 730431
• Production Capacity: 130000 Ton/Year

Product Description

1.Specification:

Product Details
Product name	ASTM SB167 Nickel Based 2.4816 Inconel Alloy
Brand name	ABOOM
Standard	ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459
Material	N08367 Al-6XN 1.4501 Incoloy25-6hn NAS 255NM
Surface	Pickling, 400grit polishing, 600grit polishing, mirror finish
Certificate	BV, LR, GL, NK, RMRS
Packing	In bundles with waterproof material, in wooden cases
Shipment	By sea, by air, by express

 

2.4816 Inconel 600 Tube Blank For Pipeline Flue Gas Emission Reduction Project Of Super Centrifuge

 

Material designation:

 

Inconel 600 nickel based alloy

US grade: N06600 / NS3102

 

 

Inconel 600 (N06600) nickel-based alloy process performance and requirements:

1. Inconel600 formability: The alloy has good hot workability. The heating temperature of ingot forging is 1110 ~ 1140 ºC; the final forging temperature is not less than 950 ºC, the slab rolling heating temperature is 1130 ~ 1170 ºC, and the finishing rolling heating temperature is 1090 ~ 1130 ° C. The final solution treatment temperature is 1010 to 1050 ° C.

2. Inconel600 welding performance: alloy welding performance is good, can be connected by various methods such as arc welding, argon arc welding, resistance welding and brazing, large or complex welded structural parts should be annealed at 870 ºC for 1h after welding to eliminate Welding stress.

3. Inconel600 parts heat treatment process: The heat treatment process of parts should be performed according to the corresponding material standard heat treatment system. Annealing of sheet and strip parts should be performed in a protective atmosphere.

 

 

Inconel 600 (N06600) nickel-based alloy chemical composition: see Table-1:

Table-1                                                                                    %

C≤	Si≤	Mn≤	P≤	S≤	Cr≥	Ni≥	Mo≥	Cu≤
0.15	0.50	1.00	0.040	0.015	14.0-17.0	72.0	-	0.50
others	N≤	Al≤	Ti≤	Fe≤	Co≤	V≤	W≤	Nb+Ta
	-	0.35	0.50	6.0-10.0	-	-	-	≤1.00

 

Note: 1 Standard BZ-44-9003B-0 for aerospace materials specifies ω (C) ≤ 0.10%, ω (P) ≤ 0.020%, and ω (Nb) ≤ 1.00%.

 

 

specification:

Outer diameter Φ6-762mm; wall thickness: 0.5-50mm, maximum length 18000mm
Special specifications are available upon negotiation.

 

 

 

2.

Chemical Composition(%)
Grade	C	Si	Mn	P	S	Cr	Ni	Mo	N	Cu
201	≤0.15	≤0.75	5.5~7.5	≤0.060	≤0.03	16.00~18.00	3.5~5.5	-	-	0.08	1.5
202	≤0.15	≤1.00	7.5~10.00	≤0.060	≤0.03	17.00~19.00	4.0~6.0	-	≤0.25
301	≤0.15	≤1.00	≤2.00	≤0.045	≤0.03	16.00~18.00	6.00~8.00	-
302	≤0.15	≤1.00	≤2.00	≤0.035	≤0.03	17.00~19.00	8.00~10.00	-
304	≤0.07	≤1.00	≤2.00	≤0.045	≤0.03	18.00~20.00	8.00~10.50	-
304L	≤0.030	≤1.00	≤2.00	≤0.045	≤0.03	18.00~20.00	9.00~13.00	-
310S	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	24.00~26.00	19.00~22.00	-
316	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	16.00~18.00	10.00~14.00	2.00~3.00
316L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.03	16.00~18.00	12.00~15.00	2.00~3.00
321	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	17.00~19.00	9.00~13.00	-
430	≤0.12	≤0.75	≤1.00	≤0.040	≤0.03	16.00~18.00		-
2205	≤0.03	≤1.00	≤2.00	≤0.030	≤0.015	22.00~23.00	4.5~6.5	2.5~3.5
2507	≤0.03	≤0.08	≤1.20	≤0.035	≤0.015	24.00~26.00	6.00~8.00	3.0~5.0
904L	≤0.02	≤1.00	≤2.00	≤0.045	≤0.035	19.00~23.00	23.00~28.00	4.0~5.0		1.0~2.0
INCONEL 028	≤0.03	≤1.00	≤2.50	≤0.030	≤0.030	≤28.0	≤34.0	≤4.0		≤1.4
MONEL 400	≤0.30	≤0.5	≤2.00	-	≤0.024	-	≥63.0	-		≤34.0
INCONEL 800	≤0.10	≤1.00	≤1.50	-	≤0.015	≤23.0	≤35	4.0~5.0	-	≤0.75	Ti≤0.6 Al≤0.6

Packaging & Shipping

Packaging Detail	Each tube is loaded into plastic bag individual, and then several pieces were wrapped in one bundle
Delivery Time	30 days

-- FAQ --

Q1:Are you factory or trading company?
A:We are professional manufacturer .

Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
 
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
  
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis 
of the quality assurance.Usually the delivery time is within 10-20 days after we recieved your desipot.

-- Contact US --