Incoloy 800ht Incoloy Alloy Seamless Alloy Pipe Uns N08811 W. Nr. 1.4876

• Product Type: Stainless Steel Pipe
• Material: Feni
• Carbon Content: Low Carbon
• PCD: as Request
• ET: as Request
• Hole: as Request
• Model NO.: Incoloy 800HT
• Transport Package: Standard Packing with Plastic Bags and Strapped Bu
• Specification: Thickness: 0.4-30mm as request
• Trademark: ABOOM
• Origin: China
• HS Code: 730431
• Production Capacity: 130000 Ton/Year

Product Description

1.Specification:

Product Details
Product name	Incoloy 800HT Incoloy Alloy Seamless Alloy Pipe Uns N08811 W.Nr.1.4876
Brand name	ABOOM
Standard	ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459
Material	N08367 Al-6XN 1.4501 Incoloy25-6hn NAS 255NM
Surface	Pickling, 400grit polishing, 600grit polishing, mirror finish
Certificate	BV, LR, GL, NK, RMRS
Packing	In bundles with waterproof material, in wooden cases
Shipment	By sea, by air, by express

Material designation: Incoloy 800HT nickel based alloy
US grade: NO8811
German grade: W.Nr.1.4876
 
Incoloy 800HT (NO8811) nickel based alloy overview:
 
Incoloy800HT (N08811) is a full-austenitic low-carbon nickel-iron-chromium alloy of the same series as Incoloy 800. The cobalt content in this alloy can be strictly controlled below 0.01%. 
 
Incoloy800HT (N08811) is resistant to many corrosive media. Its higher nickel content makes it resistant to stress corrosion cracking in aqueous corrosion conditions. The high chromium content makes it better resistant to pitting and crevice corrosion cracking. The alloy has good resistance to the corrosion of nitric acid and organic acids, but has limited corrosion resistance in sulfuric acid and hydrochloric acid.
In addition to the possibility of pitting corrosion in halides, it has good corrosion resistance in oxidizing and non-oxidizing salts. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide. Used in nitric acid condensers, resistant to nitric acid corrosion, steam heating, good mechanical properties, heating element tubes, good mechanical properties, etc. For applications up to 500 ° C, the alloy is supplied in the annealed state.
 
 
Chemical composition of Incoloy 800HT (NO8811) nickel based alloy: see Table-1:
Table-1                                                                                    %

C≤	Si≤	Mn≤	P≤	S≤	Cr≥	Ni≥	Mo≥	Cu≤
0.06-0.10	1.0	1.50	0.035	0.015	19.0-23.0	30.0-35.0	-	-
Others	Al+ Ti	Al≤	Ti≤	Fe≤	Co≤	V≤	W≤	Nb≤
	0.85-1.20	0.15-0.60	0.15-0.60	39.5	-	-	-	-

 
specification:
Outer diameter Φ6-762mm; wall thickness: 0.5-50mm, maximum length 18000mm
Special specifications are available upon negotiation.

 

2.

Chemical Composition(%)
Grade	C	Si	Mn	P	S	Cr	Ni	Mo	N	Cu
201	≤0.15	≤0.75	5.5~7.5	≤0.060	≤0.03	16.00~18.00	3.5~5.5	-	-	0.08	1.5
202	≤0.15	≤1.00	7.5~10.00	≤0.060	≤0.03	17.00~19.00	4.0~6.0	-	≤0.25
301	≤0.15	≤1.00	≤2.00	≤0.045	≤0.03	16.00~18.00	6.00~8.00	-
302	≤0.15	≤1.00	≤2.00	≤0.035	≤0.03	17.00~19.00	8.00~10.00	-
304	≤0.07	≤1.00	≤2.00	≤0.045	≤0.03	18.00~20.00	8.00~10.50	-
304L	≤0.030	≤1.00	≤2.00	≤0.045	≤0.03	18.00~20.00	9.00~13.00	-
310S	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	24.00~26.00	19.00~22.00	-
316	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	16.00~18.00	10.00~14.00	2.00~3.00
316L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.03	16.00~18.00	12.00~15.00	2.00~3.00
321	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	17.00~19.00	9.00~13.00	-
430	≤0.12	≤0.75	≤1.00	≤0.040	≤0.03	16.00~18.00		-
2205	≤0.03	≤1.00	≤2.00	≤0.030	≤0.015	22.00~23.00	4.5~6.5	2.5~3.5
2507	≤0.03	≤0.08	≤1.20	≤0.035	≤0.015	24.00~26.00	6.00~8.00	3.0~5.0
904L	≤0.02	≤1.00	≤2.00	≤0.045	≤0.035	19.00~23.00	23.00~28.00	4.0~5.0		1.0~2.0
INCONEL 028	≤0.03	≤1.00	≤2.50	≤0.030	≤0.030	≤28.0	≤34.0	≤4.0		≤1.4
MONEL 400	≤0.30	≤0.5	≤2.00	-	≤0.024	-	≥63.0	-		≤34.0
INCONEL 800	≤0.10	≤1.00	≤1.50	-	≤0.015	≤23.0	≤35	4.0~5.0	-	≤0.75	Ti≤0.6 Al≤0.6

Packaging & Shipping

Packaging Detail	Each tube is loaded into plastic bag individual, and then several pieces were wrapped in one bundle
Delivery Time	30 days

-- FAQ --

Q1:Are you factory or trading company?
A:We are professional manufacturer .

Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
 
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
  
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis 
of the quality assurance.Usually the delivery time is within 10-20 days after we recieved your desipot.

-- Contact US --