Basic Info.
Carbon Content
Low Carbon
Transport Package
Comply with International Shipping Standards
Specification
Thickness 2.0~60mm, width 1500~2500mm
Product Description
1.Specification:
Product Details |
Product name | Nitronic90 Cobalt Superalloys Steel Plate Custom N07090 ASTM A240 A182 |
Brand name | ABOOM |
Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
Material | 304, 316L, 321, 310S, 1.4301, 1.4307, 1.4404, S31803, S32750, 904L, Monel 400, Inconel 800,Incoloy926 |
Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
Certificate | BV, LR, GL, NK, RMRS |
Packing | In bundles with waterproof material, in wooden cases |
Shipment | By sea, by air, by express |
United States: UNS N07090
United Kingdom: Nitronic90
This alloy is an age-strengthened cobalt-nickel-based deformed high-temperature alloy, which contains a higher amount of cobalt and various strengthening elements. The alloy has a high tensile strength and creep resistance, good performance and corrosion resistance at 815-870 ° C 3. High fatigue strength and good formability and weldability under repeated action of cold and heat. Used in turbine engine blades, high temperature fasteners, clamps, seals and elastic components.
NITRONIC90
GENERAL CHARACTERISTICS OF NIMONIC ALLOY 90
This is a precipitation-hardenable nickel-chromium-cobalt alloy with strengthening additions of titanium and aluminum. The alloy has high stress-rupture strength and is creep resistant to 1690ºF(920ºC.)
CHEMICAL ANALYSIS |
---|
C | Carbon 0.20 max |
Mn | Manganese 1.00 max |
Si | Silicon 1.00 max |
Fe | Iron 1.50 max |
Cr | Chromium 18.00 - 21.00 |
Co | Cobalt 15.0 - 21.0 |
Al | Aluminum 1.0 - 2.0 |
Ti | Titanium 2.0 - 3.0 |
S | Sulfur 0.015 max |
Ni | Nickel Balance |
APPLICATIONS
Nitronic90 alloy is used in extreme stress applications such as turbine blades, hot working tools, exhaust reheaters and high-temperature springs.
FORGING
The alloy should be forged between 2100 and 1850ºF (1150 and 1010ºC) after which process it may be air cooled or water quenched, depending upon the size and intricacy of the forged part.
HEAT TREATMENT
For bar material the following heat treatment is recommended :
Solution treat at 1975ºF (1080ºC) for 8 hours and air cool or oil/water quench.
Precipitation treat at 1290ºF (700ºC) for 16hours and air cool.
MACHINABILITY
The alloy should be in the fully heat-treated condition prior to machining operations. Machining should be carried out under strict conditions as specified by Special Metals Corporation, who should be consulted regarding detailed procedures.
WELDABILITY
Nitronic90 alloy sheet may be welded by any resistance process. For material up to 5mm (0.2in.) thick, TIG or MIG processes are satisfactory. Above this thickness micro-cracking may occur in the weld and the heat-affected zone. Electron beam, friction, inertia and flash-butt welding are all satisfactory for material over 5 mm thick.
Welding should be done on solution-treated material and post-weld heat treatment is necessary to achieve optimum properties.
2.
Chemical Composition(%) |
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | | |
301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | | | |
302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | | | |
304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | | | |
304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | | | |
310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | | | |
316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | | | |
316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | | | |
321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | | | |
430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | | - | | | |
2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | | | |
2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | | | |
904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | | 1.0~2.0 | |
INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | | ≤1.4 | |
MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | | ≤34.0 | |
INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
Packaging & Shipping
Packaging Detail | Inside:Packed with plastic protective film to protect each piece Outside:Wrap to be bundles by waterproof craft paper |
Delivery Time | 30 days |
-- FAQ --
Q1:Are you factory or trading company?
A:We are professional manufacturer .
Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis
of the quality assurance.Usually the delivery time is within 7-15 days after we recieved your desipot.
-- Contact US --
Address:
No. 161 Xinfei Road, Songjiang Disrict, Shanghai, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, IATF16949, ISO 14064
Company Introduction:
Shanghai Aboom Metal Product Co., Ltd ((hereafter: ABOOM)), headquarter located at Shanghai China. Founded in 2012, It is mainly engaged in the production and export of industrial metal materials. The company pays attention to the cultivation of innovation ability, actively develops and applies advanced manufacturing, energy saving and environmental protection technology, and establishes a marketing and processing service network covering the whole country and the whole world.
ABOOM with customers have extensive business dealings in Europe and the United States, Japan and others, perennial supply of Monel alloy, inconel alloy, high corrosion resistance alloy, super austenitic stainless steel, 7075 alloy, 6016 alloy, 5086 alloy, 3003alloy etc...All production according to DIN/EN, the United States ASTM/ASME, Germany DIN, Japan JIS standards such as supply, and also can supply according to the standards and technical requirements of the customers, for product shape: Plate, belt, tube (seamless pipe and welded pipe), bars, forgings, pipe fittings, flanges and welding material, etc.