Basic Info.
Type
Stainless Steel Sheets
Standard
ASTM, AISI, DIN, EN
Certification
ISO, AISI, ASTM, EN
Transport Package
Comply with International Shipping Standards
Specification
Thickness 2.0~60mm, width 1500~2500mm
Product Description
1.Specification:
Product Details |
Product name | Precipitation Hardening Stainless Steel NAS630 |
Brand name | ABOOM |
Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
Material | 304, 316L, 321, 310S, 1.4301, 1.4307, 1.4404, S31803, S32750, 904L, Monel 400, Inconel 800,Incoloy926 |
Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
Certificate | BV, LR, GL, NK, RMRS |
Packing | In bundles with waterproof material, in wooden cases |
Shipment | By sea, by air, by express |
Cold rolled and Hot rolled NAS630 S17400 17-4PH precipitation hardened stainless steel plate
Regular size(mm):
Cold rolled sheet
0.5 * 1219 * C
1.0 * 1219 * C
1.5 * 1219 * C
2.0 * 1219 * C
2.5 * 1219 * C
3.0 * 1219 * C
Hot rolled plate
3.0 * 1500 * c
4.0 * 1500 * c
5.0 * 1500 * c
6.0 * 1500 * c
8.0 * 1500 * c
10 * 1500 * c
12 * 1500 * c
14 * 1500 * c
16 * 1500 * 6000
18 * 1500 * 6000
20 * 1500 * 6000
25 * 1500 * 6000
30 * 1500 * 6000
Special sizes can be customized according to customer requirements
Application area:
Offshore platforms, helicopter decks, other platforms |
food industry |
Pulp and paper industry |
Aerospace (turbine blades) |
mechanical part |
Nuclear waste barrel |
The NAS630 S17400 17-4PH alloy is a precipitation, quenched, martensitic stainless steel, and this grade has high strength, hardness (up to 300 0 C / 5000 C) and corrosion resistance. After heat treatment, the mechanical properties of the product are more complete, and it can reach compressive strength of up to 1100-1300 mpa (160-190 ksi). This grade cannot be used above 300 0C (572 0F) or very low temperature. It has good corrosion resistance to the atmosphere and diluted acids or salts. It has the same corrosion resistance as 304 and 430.
3/16" | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | 9/16" | 5/8" | 3/4" | 7/8" | 1" |
---|
4.8mm | 6.3mm | 7.9mm | 9.5mm | 11.1mm | 12.7mm | 14.3mm | 15.9mm | 19mm | 22.2mm | 25.4mm |
|
1 1/8" | 1 1/4" | 1 1/2" | 1 3/4" | 2" | 2 1/4" | 2 1/2" | 2 3/4" | 3" | 3 1/2" | 4" |
---|
28.6mm | 31.8mm | 38.1mm | 44.5mm | 50.8mm | 57.2mm | 63.5mm | 69.9mm | 76.2mm | 88.9mm | 101.6mm |
Mechanical properties
Hardened | YS 0.2% N/mm | UTS N/mm |
---|
Min. | Typ. | Min. | Typ. |
---|
A | 1070 | 1207 | 1170 | 1310 |
B | 790 | 931 | 965 | 1034 |
Hardened | YS 0.2% ksi | UTS ksi | | El% |
---|
Min. | Typ. | Min. | Typ. | | Min. | Typ. |
---|
A | 155 | 175 | 170 | 190 | | 8 | 14 |
B | 115 | 135 | 140 | 150 | | 10 | 17 |
Hardened at 496 ° C (925 ° F)-4 hours-air cooled
Hardened 593 ° C (1100 ° F)-4 hours-air cooled
The above are two examples of heat treatment.
NAS630 S17400 17-4PH precipitation hardened stainless steel plate
Hardness/Temperature tempered for 4 hours after austenitizing at 1040°C (1904°F) for 30 min quenched 100°C/sec (212°F/sec).
2.
Chemical Composition(%) |
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | | |
301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | | | |
302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | | | |
304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | | | |
304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | | | |
310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | | | |
316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | | | |
316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | | | |
321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | | | |
430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | | - | | | |
2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | | | |
2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | | | |
904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | | 1.0~2.0 | |
INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | | ≤1.4 | |
MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | | ≤34.0 | |
INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
Packaging & Shipping
Packaging Detail | Inside:Packed with plastic protective film to protect each piece Outside:Wrap to be bundles by waterproof craft paper |
Delivery Time | 30 days |
-- FAQ --
Q1:Are you factory or trading company?
A:We are professional manufacturer .
Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis
of the quality assurance.Usually the delivery time is within 7-15 days after we recieved your desipot.
-- Contact US --
Address:
No. 161 Xinfei Road, Songjiang Disrict, Shanghai, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, IATF16949, ISO 14064
Company Introduction:
Shanghai Aboom Metal Product Co., Ltd ((hereafter: ABOOM)), headquarter located at Shanghai China. Founded in 2012, It is mainly engaged in the production and export of industrial metal materials. The company pays attention to the cultivation of innovation ability, actively develops and applies advanced manufacturing, energy saving and environmental protection technology, and establishes a marketing and processing service network covering the whole country and the whole world.
ABOOM with customers have extensive business dealings in Europe and the United States, Japan and others, perennial supply of Monel alloy, inconel alloy, high corrosion resistance alloy, super austenitic stainless steel, 7075 alloy, 6016 alloy, 5086 alloy, 3003alloy etc...All production according to DIN/EN, the United States ASTM/ASME, Germany DIN, Japan JIS standards such as supply, and also can supply according to the standards and technical requirements of the customers, for product shape: Plate, belt, tube (seamless pipe and welded pipe), bars, forgings, pipe fittings, flanges and welding material, etc.