Basic Info.
Type
Stainless Steel Sheets
Standard
ASTM, AISI, DIN, EN
Certification
ISO, AISI, ASTM, EN
Transport Package
Comply with International Shipping Standards
Specification
Thickness 2.0~60mm, width 1500~2500mm
Product Description
1.Specification:
Product Details |
Product name | Passivated F51 UNS S31803 Duplex Stainless Steel High Yield Strength |
Brand name | ABOOM |
Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
Material | 304, 316L, 321, 310S, 1.4301, 1.4307, 1.4404, S31803, S32750, 904L, Monel 400, Inconel 800,Incoloy926 |
Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
Certificate | BV, LR, GL, NK, RMRS |
Packing | In bundles with waterproof material, in wooden cases |
Shipment | By sea, by air, by express |
F51 material Sheet for heat exchangers for the handling of gas and oil
Corrosion Fatigue Resistence of F51 material Sheet:
The yield strength of F51 material is about twice that of austenitic stainless steels. This allows a designer to save weight and makes the alloy more cost competitive when compared to 316L or 317L.
Physical Properties of F51 material Sheet:
Temperature °F | | 68 | 212 | 392 | 572 |
---|
Density | lb/in3 | 0.278 | - | - | - |
Modulus of Elasticity | psi x 106 | 27.6 | 26.1 | 25.4 | 24.9 |
Linear Expansion (68°F-T) | 10-6/°F | - | 7.5 | 7.8 | 8.1 |
Thermal Conductivity | Btu/h ft°F | 8.7 | 9.2 | 9.8 | 10.4 |
Heat Capacity | Btu/lb ft°F | 0.112 | 0.119 | 0.127 | 0.134 |
Electrical Resistivity | Ωin x 10-6 | 33.5 | 35.4 | 37.4 | 39.4 |
Chemical composition of F51 material Sheet:
| C | Si | Mn | P | S | Ni | Cr | Mo | N | Cu |
---|
min | ― | ― | ― | ― | ― | 4.5 | 21.0 | 2.5 | 0.08 | ― |
mix | 0.030 | 0.80 | 1.20 | 0.035 | 0.020 | 6.5 | 23.0 | 3.5 | 0.20 | ― |
Product specifications of F51 material Sheet:
Width | 1000mm/1219mm/1240mm/1500mm or as customer's requirements |
| Cold rolled:0.3~3.0mm |
Hot rolled:3mm~150mm |
Length | 1000m to 6000mm or as customer's request |
Mechanical Properties of F51 material Sheet:
Mechanical Properties at Room Temperature
| ASTM A 240 | Typical |
---|
Yield Strength 0.2%, ksi | 65 min. | 74 |
Tensile Strength, ksi | 90 min. | 105 |
Elongation, % | 25 min. | 30 |
Hardness RC | 32 max. | 19 |
Product Surface
Surface finish | Characteristics and application |
2B | The surface brightness and flatness of No.2B is better than No.2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
No.1 | Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc. |
No.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
2.
Chemical Composition(%) |
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | | |
301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | | | |
302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | | | |
304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | | | |
304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | | | |
310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | | | |
316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | | | |
316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | | | |
321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | | | |
430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | | - | | | |
2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | | | |
2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | | | |
904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | | 1.0~2.0 | |
INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | | ≤1.4 | |
MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | | ≤34.0 | |
INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
Packaging & Shipping
Packaging Detail | Inside:Packed with plastic protective film to protect each piece Outside:Wrap to be bundles by waterproof craft paper |
Delivery Time | 30 days |
-- FAQ --
Q1:Are you factory or trading company?
A:We are professional manufacturer .
Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis
of the quality assurance.Usually the delivery time is within 7-15 days after we recieved your desipot.
-- Contact US --
Address:
No. 161 Xinfei Road, Songjiang Disrict, Shanghai, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, IATF16949, ISO 14064
Company Introduction:
Shanghai Aboom Metal Product Co., Ltd ((hereafter: ABOOM)), headquarter located at Shanghai China. Founded in 2012, It is mainly engaged in the production and export of industrial metal materials. The company pays attention to the cultivation of innovation ability, actively develops and applies advanced manufacturing, energy saving and environmental protection technology, and establishes a marketing and processing service network covering the whole country and the whole world.
ABOOM with customers have extensive business dealings in Europe and the United States, Japan and others, perennial supply of Monel alloy, inconel alloy, high corrosion resistance alloy, super austenitic stainless steel, 7075 alloy, 6016 alloy, 5086 alloy, 3003alloy etc...All production according to DIN/EN, the United States ASTM/ASME, Germany DIN, Japan JIS standards such as supply, and also can supply according to the standards and technical requirements of the customers, for product shape: Plate, belt, tube (seamless pipe and welded pipe), bars, forgings, pipe fittings, flanges and welding material, etc.